NETGEAR R6350 User Manual Download Page 12

Page: 12 / 177

Table 1. LED and button descriptions (Continued)

Description

LED and Button

Solid green. The WiFi radio is operating.

Off. The WiFi radios are off.

WiFi

Solid green. A USB device is connected and is ready.

Off. No USB device is connected.

USB

Ports, Buttons, and Connectors on the Back Panel

The back panel of the router provides ports, buttons, antenna connectors, and a DC power connector.

Figure 2. Router back panel

In addition to the three antenna connectors, viewed from left to right, the back panel contains the following
components:

•

USB port. Use the USB 2.0 port (which is labeled USB 2.0-Printer) to connect the router to a USB
device such as a printer. (A USB 3.0 port is located on the front panel.)

•

Ethernet LAN ports. Use the four Gigabit Ethernet RJ-45 LAN ports to connect the router to LAN
devices.

•

WAN port. Use the yellow Gigabit Ethernet RJ-45 WAN port to connect the router to a modem.

•

WPS button. Use this button to connect WPS-enabled devices to the router.

•

Reset button. For information about using the Reset button, see

Return the Router to Its Factory Default

Settings

on page 122.

•

Power On/Off button. Press the Power On/Off button to provide power to the router.

•

DC power connector. Connect the power adapter that came in the product package to the DC power
connector.

Hardware Overview of the Router

AC1750 Smart WiFi Router Model R6350

Summary of Contents for R6350


















































































































































































Search results

Summary of Contents for R6350

Reviews:

Related manuals for R6350

Brands by name

Popular brands

NETGEAR R6350, User Manual

Search results

Summary of Contents for R6350

Reviews:

Related manuals for R6350

Brands by name

Popular brands