7000 Series L3 Managed Switch Reference Manual for Software v1.0
7-36
Switching Commands
May 30, 2003 Beta Draft
config protocol delete
This command removes the protocol-based VLAN group that is identified by this <groupid>.
Format
config protocol delete <groupid>
config protocol protocol add
This command adds the <protocol> to the protocol-based VLAN identified by <groupid>. A group
may have more than one protocol associated with it. Each interface and protocol combination can
only be associated with one group. If adding a protocol to a group causes any conflicts with
interfaces currently associated with the group, this command will fail and the protocol will not be
added to the group. The possible values for protocol are
ip, arp,
and
ipx
.
Default
none
Format
config protocol protocol add <groupid> <protocol>
config protocol protocol remove
This command removes the
<protocol>
from this protocol-based VLAN group that is identified
by this
<groupid>
. The possible values for protocol are
ip, arp,
and
ipx
.
Default
none
Format
config protocol protocol remove <groupid> <protocol>
config protocol vlan add
This command attaches a <vlan> to the protocol-based VLAN identified by <groupid>. A group
may only be associated with one VLAN at a time, however the VLAN association can be changed.
Default
none
Format
config protocol vlan add <groupid> <vlan>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...