7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands
7-35
May 30, 2003 Beta Draft
Format
config vlan port acceptframe
<
all|vlan
>
<slot.port|all>
config vlan port ingressfilter
This command enables or disables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted
and forwarded to ports that are members of that VLAN.
Default
disable
Format
config vlan port ingressfilter
<enable|dis-
able> <slot.port|all>
show protocol
This command displays the Protocol-Based VLAN information for either the entire system, or for
the indicated Group.
Format
show protocol detailed <groupid/all>
Group Name
This field displays the group name of an entry in the Protocol-
based VLAN table.
Group ID
This field displays the group identifier of the protocol group.
Protocol(s)
This field indicates the type of protocol(s) for this group.
VLAN
This field indicates the VLAN associated with this Protocol
Group.
Interface(s)
This field lists the Slot.Port interface(s) that are associated with
this Protocol Group.
config protocol create
This command adds protocol-based VLAN group to the system. The
<groupName>
is a character
string of 1 to 16 characters. When it is created, the protocol group will be assigned a unique
number that will be used to identify the group in subsequent commands.
Format
config protocol create <groupname>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...