7000 Series L3 Managed Switch Reference Manual for Software v1.0
Quick Startup
6-9
May 30, 2003 Beta Draft
OSPF Configuration
The config commands used in the following example enable OSPF on ports 0.1 and 0.2
VLAN Routing
This section provides examples of VLAN Routing for RIP and OSPF.
RIP Configuration
This example creates two router ports to run RIP 2.
Table 6-11.
OSPF Configuration Example
OSPF
config routing enable
config interface routing 0.1 enable
config interface routing 0.2 enable
config router id 192.150.2.1
config router ospf interface areaid 0.1 0.0.0.0
config router ospf interface areaid 0.2 0.0.0.0
config ip interface create 0.1 192.150.2.1 255.255.255.0
config ip interface create 0.2 192.150.3.1 255.255.255.0
config router ospf adminmode enable
config router ospf interface mode 0.1 enable
config router ospf interface mode 0.2 enable
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...