7000 Series L3 Managed Switch Reference Manual for Software v1.0
8-34
Routing Commands
May 30, 2003 Beta Draft
Default
The default value for authorization type is No authorization.
Format
config router vrrp interface authdetails
<slot.port> <vrID> <none|simple> [key]
config router vrrp removedetails
This command removes all VRRP configuration details of the virtual router configured on a
specific interface. The parameter <vrID> is the virtual router ID which has an integer value ranges
from 1 to 255.
Format
config router vrrp removedetails
<slot.port>
<vrID>
config router rtrdiscovery adminmode
This command enables or disables Router Discovery on an interface. The possible values for
<mode> are enable and disable.
Default
enable
Format
config router rtrdiscovery adminmode
<slot.port> <enable|disable>
config router rtrdiscovery maxinterval
This command configures the maximum time, in seconds, allowed between sending router
advertisements from the interface. The range for maxinterval is 4 to 1800 seconds.
Default
600
Format
config router rtrdiscovery maxinterval
<slot.port> <4-1800>
config router rtrdiscovery mininterval
This command configures the minimum time, in seconds, allowed between sending router
advertisements from the interface. The range for mininterval is 3 to the value of maxinterval.
Default
0.75 * maxinterval
Format
config router rtrdiscovery mininterval
<slot.port> <3-maxinterval>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...