NETGEAR ProSafe GSM7324, Reference Manual, Page: 119 / 263

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands 7-61
May 30, 2003 Beta Draft
Read Only access. There can only be one Read/Write user and up
to 5 Read Only users.
SNMPv3AccessMode
This field displays the SNMPv3 Access Mode. If the value is set
to
ReadWrite,
the SNMPv3 user will be able to set and retrieve
parameters on the system. If the value is set to
ReadOnly,
the
SNMPv3 user will only be able to retrieve parameter information.
The SNMPv3 access mode may be different than the CLI and
Web access mode.
Authentication
This field displays the authentication protocol to be used for the
specified login user.
Encryption
This field displays the encryption protocol to be used for the
specified login user.
config users add
This command adds a new user (account) if space permits. The account <name> is up to eight
alphanumeric characters. The <name> is not case-sensitive.
Six user names can be defined.
Format
config users add
<
name
>
config users passwd
This command changes the password of an existing operator. The password is up to eight
alphanumeric characters. The name and password are not case-sensitive.
When a password is changed, a prompt will ask for the operator’s former password. If none, press
enter.
Default
Blank (indicating no password)
Format
config users passwd <user>
config users delete
This command removes an operator.
Format
config users delete <name>
Note:
The admin user account cannot be deleted.