NETGEAR ProSAFE GS108Ev3, Installation Manual

Page: 1 / 2

Installation Guide
On=Link
Blink=ACT
Both=1000M
100M 10M
8-Port Gigabit Ethernet Plus Switch
GS108Ev3
Package contents
• Switch
• Power adapter (varies by region)
• Wall-mount kit
• Installation guide
GS108Ev3 switch
Router
IP camera
ReadyNAS
Gaming console
Smart TV
Internet
Laptop
WiFi access point
Desktop
1. Register the switch
1. From a computer or mobile device that is connected to the Internet, visit
my.netgear.com .
2. Log in to your NETGEAR account.
Note: If you don’t have a free NETGEAR account, you can create one.
The My Products page displays.
3. From the menu on the left, select Register a Product.
4. In the
Serial Number field, type the serial number of your switch.
The serial number is 13 digits long. It is printed on the switch label.
5. From the Date of Purchase menu, select the date that you purchased the
switch.
6. Click the REGISTER button.
Your switch is registered to your NETGEAR account.
A confirmation email is sent to your NETGEAR account email address.
2. Connect the switch
Sample connections
Note: We recommend that you use a Category 5e (Cat 5e) cable or higher-rated
cable for Gigabit Ethernet connections.
This switch is designed for indoor use only. If you want to connect it to a device
located outdoors, the outdoor device must be properly grounded and surge
protected, and you must install an Ethernet surge protector inline between the
switch and the outdoor device. Failure to do so can damage the switch.
3. Check the LEDs
When you connect the power cord to the switch and plug it into an electrical
outlet, the LEDs indicate the status:
LED Description
Power LED
Solid green The switch is powered on and operating normally.
Off Power is not supplied to the switch.
Left port LED Right port LED
Combined, these RJ-45 port LEDs indicate link,
speed, and activity.
Solid green Solid green A valid 1 Gbps port link is established.
Solid green Off A valid 100 Mbps port link is established.
Off Solid green A valid 10 Mbps port link is established.
Blinking green Blinking green The port is transmitting or receiving packets at
1 Gbps.
Blinking green Off The port is transmitting or receiving packets at
100 Mbps.
Off Blinking green The port is transmitting or receiving packets at
10 Mbps.
Off Off No port link is established.
Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warranty information.