manualshive.com logo in svg

NETGEAR ProSAFE GS105Ev2, User Manual

Share
Download
NETGEAR ProSAFE GS105Ev2 User Manual Download Page 74

Manage and Monitor the Switch 

74

ProSAFE Gigabit Web Managed (Plus) Switches 

By default, mirroring is disabled.

10. 

Click the 

APPLY

 button.

Your settings are saved.

View Switch Information

You can view the switch product name (model), MAC address, firmware level, DHCP mode, 
and other network information.

Use Browser-Based Access to View Switch Information

To view information about the switch:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection, or connect directly to a switch that is 
off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the Switch Using a Web 

Browser 

on page 7.

The login window opens.

4. 

Enter the switch’s password in the 

password

 field.

The switch’s default password is 

password

.

Note:

To navigate to this page, select 

System > Management > Switch 

Information

.

Summary of Contents for ProSAFE GS105Ev2




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands