Manage and Monitor the Switch
63
ProSAFE Gigabit Web Managed (Plus) Switches
6.
Select the
Enable
button to enable the power saving mode.
By default, the
Disable
radio button is selected.
7.
Click the
Apply
button.
Your settings are saved.
Use the ProSAFE Plus Utility to Enable Power Saving Mode
To enable the power saving options:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Double-click the
ProSAFE Plus Utility
icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3.
Select the switch.
If you do not see the switch, click the
REFRESH
button.
4.
Click the
APPLY
button.
You are asked to enter the password for the switch.
5.
Enter the switch’s password in the
password
field.
The switch’s default password is
password
.
The Switch Status page displays.
6.
Select
System > Management > Power Saving Mode
.
The previous figure is an example. Your switch might provide other options.
7.
Select the
Enable
radio button.
By default, the
Disable
radio button is selected.
8.
Click the
APPLY
button.
Your settings are saved.
