NETGEAR Orbi RBRE950 User Manual Download Page 126 | Manualshive

Page: 126 / 160

background image

About VPN connections

A virtual private network (VPN) lets you use the Internet to securely access your network
when you aren’t home.

This type of VPN access is called a client-to-gateway tunnel. The computer is the client,
and the router is the gateway. To use the VPN feature, you must do the following:

•

Log in to the router to enable and configure OpenVPN (see Enable OpenVPN service
in the router on page 127).

•

Install OpenVPN client software and configuration files on your device from which
you want to use VPN (see Install OpenVPN software on a VPN client on page 128).

•

Run the OpenVPN client software on your device when you want to use a VPN
connection.

Enabling OpenVPN on your router allows VPN connections between the router and a
client, for example your laptop when you are away from home. The router provides the
VPN service and the laptop is the VPN client. Traffic between the router and the laptop
is encrypted.

Note: The router itself does not function as a VPN client to an external VPN service
provider, so it does not encrypt traffic passing between your home network and the
Internet.

VPN can use either Dynamic DNS (DDNS) or a static IP address to connect with your
router:

•

To use a DDNS service, register for a DDNS account with a host name. You use the
host name to access your network. The router supports these DDNS accounts:
NETGEAR, No-IP, and Dyn. For more information, see Manage Dynamic DNS on
page 72.

•

If your Internet service provider (ISP) assigned a static WAN IP address that never
changes, the VPN can use that IP address to connect to your home network.

LAN IP addressing in VPN networks

For the VPN connection to work, your computer or device (the VPN client) must be
connected to a network that uses a different LAN IP address scheme than your router.

The default LAN IP address scheme for the router is 192.168.1.x. (The most common IP
schemes are 192.168.x.x, 172.x.x.x, and 10.x.x.x.) If you experience a conflict, change
the IP scheme either for your home network or for the network where your VPN client
device is connected.

User Manual

126

Use OpenVPN to Access Your
Network

Orbi Quad-Band Mesh WiFi 6E System

«
...
124
125
126
127
128
...
»

Summary of Contents for Orbi RBRE950

































































































































































Reviews:

No comments

Related manuals for Orbi RBRE950

Brand: ZETR Pages: 2

Brand: CallDirect Pages: 33

Brand: Panasonic Pages: 44

TokenLink 3C359B

Brand: 3Com Pages: 4

TokenLink 3C359B

Brand: 3Com Pages: 8

TokenLink 3C339

Brand: 3Com Pages: 2

EtherLink 3C985B-SX

Brand: 3Com Pages: 44

Brand: 3Com Pages: 88

Brand: 3Com Pages: 2

Brand: 3Com Pages: 111

TokenLink 3C359

Brand: 3Com Pages: 4

Brand: 3Com Pages: 74

Brand: 3Com Pages: 6

Brand: Linksys Pages: 2

Network Card-MS

Brand: Eaton Pages: 89

Module NI PXI-8250

Brand: National Instruments Pages: 39

Brand: REXROTH Pages: 68

Brand: Konig Pages: 73

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands