To disable a MAC ACL for a specific network:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 33.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > MAC ACL.
The MAC ACL page displays.
5. Go to the section for the network for which you want to disable the MAC ACL.
6. For the specific network, click the Enable MAC Access Control Enabled button.
The button changes to the gray Disabled button. The MAC ACL is disabled.
Network access control list
You can use the network access control list (ACL) to block or allow access to the entire
Orbi network. An ACL functions with the MAC addresses of WiFi and wired devices that
the router detects on the Orbi network and that you can either allow access to your
network or deny access to your network. That is, the router can detect the MAC addresses
of devices that are or were connected to the Orbi network and list the MAC addresses
of these devices.
Note: The network access control list differs from a MAC ACL (see MAC access control
lists on page 57). A MAC ACL is specific to a particular WiFi network or to the wired
network but is not based on devices that the router detects on the entire Orbi network.
With a MAC ACL, you can allow or deny access to a device on a specific WiFi network
or the wired network. The network access control list and MAC ACLs are mutually
exclusive. Use either the network access control list or MAC ACLs.
User Manual
62
Control Access to the Internet
Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80
