Before mounting the access point, first set up and test the access
point to verify WiFi network connectivity.
Note:
If you are mounting the access point on a hard ceiling,
follow the
instructions in
Mount the Satellite on a Wall
.
1.
Slide the T-bar partially
into the metal bracket.
2.
Attach the metal bracket
to the ceiling bar.
3.
Push the T-bar over the
ceiling bar.
4.
Use the lock screw to
lock the metal bracket
into place.
5. Use the four short screws
to attach
the plastic
mount to the metal
bracket.
6.
Slide the satellite onto
the plastic mount.
7.
Use the retaining clip
to lock the satellite into
place.
8.
Cable the satellite to
your network.
Mount the Satellite on a Drop Ceiling
Mount the Satellite on a Wall
1.
Place the plastic mount
on the wall.
2.
Mark the wall where the
two mounting holes are.
3.
If needed, drill holes.
4.
Use the two wall anchors
and tall screws to attach
the plastic mount to the
wall.
5.
Slide the satellite onto
the plastic mount.
6.
Use the retaining clip
to lock the satellite into
place.
7.
Cable the satellite to
your network.
Package Contents
Quick Start
Model SRC60
Orbi Pro Ceiling Satellite
(Model SRC60)
Power adapter
(varies by region)
Metal bracket with T-bar
and lock screw for ceiling
mounting and 4 short
screws to attach the plastic
mount to the metal bracket
Plastic mount for either
ceiling mounting or wall
mounting
2 tall screws and anchors
to attach the plastic mount
to a wall
PRO
Note:
If you use a Power over Ethernet (PoE) connection to a
PoE+ switch, the satellite does not require a power adapter.
