10. Press the Sync button on the satellite.
The satellite’s ring LED pulses white.
11. Click the SYNC button in the router web interface.
The router attempts to sync with the satellite.
The satellite’s ring LED lights one of the following colors for about three minutes
and then turns off:
•
Blue. The router and satellite successfully synced, and the connection between
the router and satellite is good.
•
Amber. The router and satellite successfully synced, and the connection between
the router and satellite is fair. Consider moving the satellite closer to the router.
•
Magenta. The router and satellite failed to sync. Move the satellite closer to the
router and try again.
Manually update satellite firmware
Note: Rather than manually updating firmware, you can use the Orbi router web interface
to check if new firmware is available and update
both
your router and your satellite. For
more information, see Check for firmware updates on page 102.
We recommend that you update your satellite’s firmware
before
you update the router’s
firmware.
To manually update your satellite’s firmware by using the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Firmware Update > Manual Update.
The Firmware Update page displays.
5. Select the check box next to your satellite’s model name.
User Manual
144
Set Up and Manage an Optional
Orbi Satellite
Orbi 4GX Router Model LBR1020
