Reference Manual for the ProSafe Network Management System NMS100
4-12
Polling and Emailing
September 2004 202-10058-01
3. Then, add an Event Filter for the selected devices
a.
Add a new event filter for a set of devices as described in Steps 4 through 7 of
“Emailing
or Paging the Administrator on an Event” on page 5-6
.
b. In the Action tab, select SwitchOperators in the Page pull-down to page the two new users.
c.
Select SwitchOperators in the Email pull-down to send email to the two new users.
d. In the Match tab of the Add Event Filter dialog, make sure that you match different
devices than those used in the previous section (emailing the Administrator). Otherwise,
this new filter will not be unique and it will not match any incoming events.
e.
Remember to set the Auto-Clears flags for any matching events.
