NETGEAR NIGHTHAWK RAX120 User Manual Download Page 120

Page: 120 / 174

Access a Storage Device Connected to the
Router From a Windows-Based Computer

To access the USB storage device from a Windows-based computer:

1. Connect a USB storage device to a USB port on your router.

2. If your USB storage device uses a power supply, connect it.

You must use the power supply when you connect the USB storage device to the
router.

When you connect the USB storage device to the router’s port, it might take up to
two minutes before it is ready for sharing. By default, the USB storage device is
available to all computers on your local area network (LAN).

3. Select

Start > Run

4. Enter

\\readyshare

in the dialog box.

5. Click the

button.

A window automatically opens and displays the files and folders on the USB storage
device.

Map a USB Device to a Windows Network
Drive

To map the USB storage device to a Windows network drive:

1. Connect a USB storage device to a USB port on your router.

2. If your USB storage device uses a power supply, connect it.

You must use the power supply when you connect the USB storage device to the
router.

3. Select

Start > Run

4. Enter

\\readyshare

in the dialog box.

5. Click the

button.

A window automatically opens and displays the USB storage device.

User Manual

120

Share USB Storage Devices
Attached to the Router

Nighthawk AX12 12-Steam AX6000 WiFi Router

Summary of Contents for NIGHTHAWK RAX120















































































































































































Search results

Summary of Contents for NIGHTHAWK RAX120

Reviews:

Related manuals for NIGHTHAWK RAX120

Brands by name

Popular brands

NETGEAR NIGHTHAWK RAX120, User Manual

Search results

Summary of Contents for NIGHTHAWK RAX120

Reviews:

Related manuals for NIGHTHAWK RAX120

Brands by name

Popular brands