NETGEAR Nighthawk R7000P User Manual Download

Page: 99 / 155

Your settings are saved.

Add a Network Folder on a USB Storage Device

You can add network folders on a USB storage device connected to a router USB port.

To add a network folder:

Launch a web browser from a computer or mobile device that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > USB Functions > ReadySHARE Storage.

The USB Storage (Advaned Settings) page displays.

In the Available Network Folders section, select the USB storage device.

Click the Create Network Folder button.

The Add Folder window opens.

If this window does not open, your web browser might be blocking pop-ups. If it is, change the browser
settings to allow pop-ups.

Complete the fields.

The user name (account name) for All–no password is guest. The password for admin is the same one
that is used to log in to the router. By default, it is password.

Click the Apply button.

The folder is added on the USB storage device.

Edit a Network Folder on a USB Storage Device

You can edit network folders on a USB storage devices connected to a router USB port.

To edit a network folder:

Launch a web browser from a computer or mobile device that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

Share USB Storage Devices Attached to the Router

Nighthawk AC2300 Smart WiFi Router

Summary of Contents for Nighthawk R7000P




























































































































































Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands

NETGEAR Nighthawk R7000P, User Manual

Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands