The DELETE button displays.
7. Click the
DELETE
button.
The IP address is removed and can no longer access the local browser interface of
the switch.
8. To remove more IP addresses, repeat the previous step.
If you remove all IP addresses, all access restrictions are lifted and any IP address
can access the local browser interface of the switch.
Manage the DoS Prevention Mode
You can enable the Denial of Service (DoS) prevention mode so that the switch
automatically blocks malicious packets. By default, this mode is disabled.
To manage the DoS prevention mode:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select
SETTINGS
.
The PRESET MODES page displays.
5. From the menu on the left, select
DOS PREVENTION
.
The DOS PREVENTION page displays.
6. Enable or disable the DoS prevention mode by clicking the button.
When the DoS prevention mode is enabled, the button bar displays green.
7. Click the
APPLY
button.
Your settings are saved.
User Manual
90
Maintain and Monitor the Switch
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
