3. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The HOME page displays.
4. Select
PRESET MODES
.
The PRESET MODES page displays. The
LOAD
tab is automatically selected.
5. Select
STANDARD PRESET (DEFAULT)
.
The PREVIEW STANDARD PRESET section shows the settings for the Standard Preset
mode.
6. Click the
APPLY
button.
Your settings are saved.
Manage Custom Performance Preset Modes
You can save your current Quality of Service (QoS) settings as a custom preset mode,
including the settings for IGMP snooping, flow control, the power saving mode, the
QoS mode, and the priorities of the individual ports. You can also rename or delete
these custom preset modes.
Save Your Quality of Service Settings as a Custom Preset
Mode
Before you apply a performance preset mode (see Apply a Performance Preset Mode
on page 29), you can save your current Quality of Service (QoS) settings as a custom
preset mode.
To save your QoS settings as a custom preset mode:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The HOME page displays.
4. Select
PRESET MODES
.
User Manual
32
Optimize the Switch
Performance
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
