NETGEAR Nighthawk C6900 User Manual Download | Manualshive

Page: 88 / 94

background image

Nighthawk AC1900 WiFi Cable Modem Router

Troubleshooting

User Manual

89

Changes Not Saved

If the modem router does not save the changes you make in the modem router interface,
check the following:

•

When entering configuration settings, always click the

Apply

button before moving to

another page or tab, or your changes are lost.

•

Click the

Refresh

or

Reload

button in the web browser. The changes might have

occurred, but the old settings might be in the web browser’s cache.

Wireless Connectivity

If you are having trouble connecting wirelessly to the modem router, try to isolate the
problem:

•

The computer or WiFi device that you are using does not find the WiFi network.

This can happen for the following reasons:

-

Someone pressed the

WiFi On/Off

button on the modem router, which turned off the

wireless radios.

Check the 2.4 GHz and 5 GHz LEDs on the front of the modem router. If they are off,
press the

WiFi On/Off

button to turn the wireless radios back on.

-

Someone logged in to the modem router and disabled its wireless radios or set up a
wireless schedule.

In this case, pressing the

WiFi On/Off

button does not turn the wireless radios back

on. You must log in to enable the wireless radios. Use an Ethernet cable to for a wired
connection to the modem router. Then log in and change the settings. For more
information, see

Control the Wireless Radios on page 54

.

-

Someone logged in to the modem router and disabled its SSID broadcast. Your
wireless network is hidden and does not display in your wireless client’s scanning list.
(By default, SSID broadcast is enabled.)

To connect with WiFi, you must type the network SSID and password. For information
about how to enable the SSID broadcast, see

Specify Basic WiFi Settings on

.

•

You can find the WiFi network, but you can’t connect. Check the following:

-

Make sure that your computer or WiFi device supports the security that you are using
for your wireless network (WPA or WPA2)?

-

You are not sure what the WiFi password is.

The preset WiFi password is on the product label. If you changed it and do not
remember the new password, you can use a wired Ethernet connection to log in to

«
...
86
87
88
89
90
...
»

Summary of Contents for Nighthawk C6900































































































Reviews:

No comments

Related manuals for Nighthawk C6900

Brand: D-Link Pages: 13

Brand: D-Link Pages: 36

Brand: D-Link Pages: 135

Brand: D-Link Pages: 6

AirPlusXtremeG DI-624

Brand: D-Link Pages: 83

AirPlusXtremeG DI-624

Brand: D-Link Pages: 97

Brand: LevelOne Pages: 14

Brand: Teldat Pages: 24

Brand: Master&Dynamic Pages: 162

Brand: Edimax Pages: 16

UniFi AP BeaconHD

Brand: Ubiquiti Pages: 11

Brand: Rosewill Pages: 8

Brand: Linksys Pages: 112

Brand: Linksys Pages: 40

Brand: Tenda Pages: 115

Brand: Xiaomi Pages: 3

Brand: Xirrus Pages: 3

Brand: Spectrum 24 Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands