NETGEAR Nighthawk C6900 User Manual Download

Page: 55 / 94

Nighthawk AC1900 WiFi Cable Modem Router

Specify Network Settings

User Manual

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Advanced Setup > Wireless Settings

The Advanced Wireless Settings page displays.

Click the

Add a new period

button.

Use the lists, radio buttons, and check boxes to set up a period during which you want to

turn off the wireless signal.

Click the

Apply

button.

The Advanced Wireless Settings page displays.

Select the

Turn off wireless signal by schedule

check box to activate the schedule.

Click the

Apply

button.

Specify WPS Settings

Wi-Fi Protected Setup (WPS) lets you join the WiFi network without typing the WiFi
password.

To specify WPS Settings:

Launch an Internet browser from a computer or wireless device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Summary of Contents for Nighthawk C6900































































































Search results

Summary of Contents for Nighthawk C6900

Reviews:

Related manuals for Nighthawk C6900

Brands by name

Popular brands

NETGEAR Nighthawk C6900, User Manual

Search results

Summary of Contents for Nighthawk C6900

Reviews:

Related manuals for Nighthawk C6900

Brands by name

Popular brands