NETGEAR Nighthawk C6900 User Manual Download

Page: 44 / 94

Nighthawk AC1900 WiFi Cable Modem Router

Specify Network Settings

User Manual

This IP address must be in the same subnet as the modem router.

In the

Ending IP Address

field, type the number at the end of the range of IP

addresses.

This IP address must be in the same subnet as the modem router.

Click the

Apply

button.

Your settings are saved.

The modem router delivers the following parameters to any LAN device that requests DHCP:

•

An IP address from the range that you have defined

•

Subnet mask

•

Gateway IP address (the modem router’s LAN IP address)

•

DNS server IP address (the modem router’s LAN IP address)

Disable the DHCP Server Feature in the

Modem Router

By default, the modem router acts as a DHCP server. The modem router assigns IP, DNS
server, and default gateway addresses to all computers connected to the LAN. The assigned
default gateway address is the LAN address of the modem router.

You can use another device on your network as the DHCP server, or specify the network
settings of all your computers.

To disable the DHCP server feature in the modem router:

Launch an Internet browser from a computer or wireless device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Setup > LAN Setup.

Clear the

Use Router as DHCP Server

check box.

Click the

Apply

button.

(Optional) If this service is disabled and no other DHCP server is on your network, set your

computer IP addresses manually so that they can access the modem router.

Summary of Contents for Nighthawk C6900































































































Search results

Summary of Contents for Nighthawk C6900

Reviews:

Related manuals for Nighthawk C6900

Brands by name

Popular brands

NETGEAR Nighthawk C6900, User Manual

Search results

Summary of Contents for Nighthawk C6900

Reviews:

Related manuals for Nighthawk C6900

Brands by name

Popular brands