NETGEAR Nighthawk AX6 AX4300 User Manual Download | Manualshive

Page: 81 / 162

background image

Enable or disable implicit beamforming

Implicit beamforming means that the router can use information from WiFi clients that
support beamforming to improve the WiFi signal.

To enable or disable implicit beamforming:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > Advanced Setup > Wireless Settings.

The Wireless Settings page displays.

5. Scroll down below the WPS Settings section and select or clear the Enable Implicit

BEAMFORMING check box.
Selecting this check box enables implicit beamforming. Clearing this check box
disables implicit beamforming.

6. Click the Apply button.

Your settings are saved.

If you connected over WiFi to the network, you are disconnected from the network
and must reconnect.

Enable or disable MU-MIMO

Multiuser multiple input, multiple output (MU-MIMO) improves performance when many
WiFi clients that are MU-MIMO-capable transfer data at the same time. For MU-MIMO
to function, WiFi clients must support MU-MIMO, and they must be connected to a 5
GHz WiFi band. This feature is enabled by default, but you can disable it.

To enable or disable MU-MIMO:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

User Manual

81

Manage Network Settings

Nighthawk AX6 6-Stream AX5400 WiFi Router

«
...
79
80
81
82
83
...
»

Summary of Contents for Nighthawk AX6 AX4300



































































































































































Reviews:

No comments

Related manuals for Nighthawk AX6 AX4300

Brand: Sagem Pages: 19

Brand: Patton electronics Pages: 8

Brand: Z Microsystems Pages: 51

301297U - 1TB Ethernet Disk XP Embedded Network Attached...

Brand: LaCie Pages: 67

Brand: DIGIWEB Pages: 16

Brand: TP-Link Pages: 2

Brand: ZyXEL Communications Pages: 12

Brand: Patton electronics Pages: 8

Brand: CalAmp Pages: 52

Linktropy MINI-G

Brand: Apposite Technologies Pages: 57

WNR2000v2 - Wireless- N 300 Router

Brand: NETGEAR Pages: 144

BladeCenter 1/10 Gb Uplink Ethernet SwitchModule

Brand: IBM Pages: 58

Barricade g SMC2804WBRP-G

Brand: SMC Networks Pages: 53

Brand: Radionics Pages: 100

Brand: Aethra Pages: 2

Brand: LevelOne Pages: 2

EIR508-2-T Series

Brand: B&B Electronics Pages: 71

Brand: SOYO Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands