NETGEAR Nighthawk AX6 AX4300 User Manual Download | Manualshive

Page: 64 / 162

background image

Change the WiFi mode if AX WiFi is enabled

To change the WiFi mode settings if AX WiFi is enabled:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select Wireless.

The Wireless Settings page displays.

5. In the Wireless Network (2.4 GHz b/g/n/ax) section, select a WiFi mode from the

Mode menu.

•

Up to 54 Mbps. This mode allows 802.11ax, 802.11n, 802.11g, and 802.11b
devices to join the network but limits 802.11n devices to functioning at up to 54
Mbps.

•

Up to 230 Mbps. This mode allows for reduced interference with neighboring
WiFi networks. This mode allows 802.11ax, 802.11n, 802.11g, and 802.11b
devices to join the network but limits 802.11n devices to functioning at up to 230
Mbps.

•

Up to 480 Mbps. This mode allows 802.11ax, 802.11n, 802.11g, and 802.11b
devices to join the network and allows 802.11n devices to function at up to 480
Mbps. This mode is the default mode.

6. In the Wireless Network (5 GHz a/n/ac/ax) section, select a WiFi mode from the Mode

menu.

•

Up to 480 Mbps. This mode allows 802.11ax, 802.11ac, 802.11n, and 802.11a
devices to join the selected WiFi network in the 5 GHz-1 band of the network but
limits 802.11ac and 802.11n devices to functioning at up to 480 Mbps.

•

Up to 960 Mbps. This mode allows for reduced interference with neighboring
WiFi networks. This mode allows 802.11ax, 802.11ac, 802.11n, and 802.11a
devices to join the selected WiFi network in the 5 GHz-1 band of the network but
limits 802.11ac devices to functioning at up to 960 Mbps.

•

Up to 1920 Mbps. This mode allows 802.11ax, 802.11ac, 802.11n, and 802.11a
devices to join the selected WiFi network in the 5 GHz-1 band of the network and

User Manual

64

Manage Network Settings

Nighthawk AX6 6-Stream AX5400 WiFi Router

«
...
62
63
64
65
66
...
»

Summary of Contents for Nighthawk AX6 AX4300



































































































































































Reviews:

No comments

Related manuals for Nighthawk AX6 AX4300

Brand: Zhone Pages: 7

Brand: Zhone Pages: 1

ION 1200 Series

Brand: PaloAlto Networks Pages: 90

Hollywood DV-Bridge

Brand: Dazzle Pages: 63

Brand: Jøtul Pages: 20

8677 - BladeCenter Rack-mountable - Power Supply

Brand: IBM Pages: 126

NetIron MLXe Series

Brand: Brocade Communications Systems Pages: 305

18x18 Card Cage

Brand: WolfPack Pages: 31

Brand: Conel Pages: 32

Brand: Razer Pages: 17

Brand: Topcom Pages: 16

Brand: Supermicro Pages: 15

Brand: Solwise Pages: 231

Brand: Goobay Pages: 20

OmniStor 4900F Series

Brand: Rackable Systems Pages: 196

Brand: WIN Enterprises Pages: 25

Brand: Eaton Pages: 32

Brand: Gemtek Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands