Installation Guide
N300 WiFi USB Mini Adapter
Model WNA3100M
Package Contents
N130
Wir
eless M
icr
o USB A
dapt
er
WNA3100M
N300 Wireless Adapter
Resource CD with NETGEAR Genie
Installation
Estimated completion time: 10 minutes.
1.
Insert the
Resource CD
in your computer’s CD drive. If the CD main screen
does not display, browse the files on the CD, and double-click
Autorun.exe
.
2.
Click
Setup
.
The Software Update Check screen displays.
3.
If you are connected to the Internet, click
Check for Updates
. If not, then click
Install from CD
.
4.
Click
I agree
to accept the license agreement, and then click
Next
.
A message displays asking you to wait while software is installed. This might
take a few minutes. Then you are prompted to insert your adapter.
5.
Insert the adapter into a USB port on your computer.
Note:
For best results, put the wireless adapter at least 4 feet (1 meter) away
from your router.
6.
Click
Next
.
NETGEAR Genie displays a list of wireless networks in your area.
Join a Wireless Network
You can join a wireless network from this NETGEAR Genie screen, or you can use
Wi-Fi Protected Setup (WPS) if your wireless network supports it.
•
NETGEAR Genie
: Click your wireless network to select it from the list, and then
click
Connect
. If the network is secure, enter its password or network key.
•
WPS
: Press and hold the
WPS
button on the side of the adapter for 2 seconds.
Within 2 minutes, press the
WPS
button on your wireless router or gateway.
The adapter joins the network, which can take a few minutes. Your settings are
saved in a profile.
