NETGEAR MS70 User Manual Download Page 13

Page: 13 / 150

The satellite label also displays the WiFi network name and password, the satellite’s
MAC address, and the satellite’s serial number. The following is an example of what the
satellite label might look like:

Figure 4. Satellite label

Connect your router

Power on your router and connect it to a modem.

Figure 5. Connect your router

To connect your router:

1. Unplug your modem’s power, leaving the modem connected to the wall jack for

your Internet service.
If your modem uses a battery backup, remove the battery.

2. Plug in and turn on your modem.

If your modem uses a battery backup, put the battery back in.

3. Connect your modem to the Internet port of your router with the Ethernet cable that

came with your router.

4. Connect the power adapter to your router and plug the power adapter into an outlet.

User Manual

Overview

Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite

Summary of Contents for MS70























































































































































Search results

Summary of Contents for MS70

Reviews:

Related manuals for MS70

Brands by name

Popular brands

NETGEAR MS70, User Manual

Search results

Summary of Contents for MS70

Reviews:

Related manuals for MS70

Brands by name

Popular brands