4. Verify that the package contains the following items:
•
Switch of the correct model.
•
Detachable power cord (varies by region).
•
Rubber footpads for tabletop installation.
•
Two rack-mount installation brackets.
•
Rack-mount installation screws and washers:
-
Eight small screws to attach the brackets to the switch (four small screws for
each side).
-
Four large screws and four washers to attach the brackets to the rack (two
screws and two washers for each side).
-
Four additional large screws of a different size to attach the brackets to the
rack, allowing you to select the most suitable set of screws for the rack.
•
Installation guide.
5. If any item is missing or damaged, contact your local NETGEAR reseller for
replacement.
Step 4: Install the switch
You can install the switch in a standard 19-inch (48.26-centimeter) network equipment
rack or on a flat surface.
Install the switch in a rack
To install the switch in a rack, you need the 19-inch rack-mount kit supplied with the
switch.
To install the switch in a rack:
1. Attach the supplied mounting brackets to the side of the switch.
2. Insert the screws provided in the product package through each bracket and into
the bracket mounting holes in the switch.
3. Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
4. Align the mounting holes in the brackets with the holes in the rack, and insert two
pan-head screws with nylon washers through each bracket and into the rack.
Hardware Installation Guide
28
Installation
8-Port Multi-Gigabit/10G Ethernet (Ultra60 PoE++) Smart Managed Pro Switch with 2 SFP+ Ports