Mobile Broadband Wireless-N Router MBRN3000 User Manual
6-8
Troubleshooting
v1.0, October 2009
•
Press both the Wireless button and WPS button on the side of the router for 5 seconds. Use this
method for cases when the administration password or IP address is not known.
Problems with Date and Time
The E-mail screen in the Content Filtering section displays the current date and time of day. The
Wireless Router uses the Network Time Protocol (NTP) to obtain the current time from one of
several network time servers on the Internet. Each entry in the log is stamped with the date and
time of day. Problems with the date and time function can include the following:
•
Date shown is January 1, 2000.
Cause: The router has not yet successfully reached a network time server. Check that your
Internet access settings are configured correctly. If you have just completed configuring the
router, wait at least 5 minutes, and check the date and time again.
•
Time is off by one hour.
Cause: The router does not automatically sense daylight savings time. On the E-mail screen,
select or clear the
Adjust for Daylight Savings Time
check box.
Note:
Pressing the reset button on the router reboots the unit but does not restore the
factory default settings.
Summary of Contents for MBRN3000
Page 6: ...vi v1 0 October 2009 ...
