Factory Default Settings
You can reset the modem to the factory default settings, which are shown in the following table.
For more information about resetting the modem to its factory default settings, see
on page 62.
Table 10. LB2120 modem factory default settings
Default Settings
Feature
Login
http://192.168.5.1
User login URL
The modem does not require an admin user name.
Admin user name
See the modem label
Login password (case-sensitive)
Local area network (LAN)
192.168.5.1
LAN IP address
255.255.255.0
Subnet mask
Router mode enabled; Bridge mode disabled
Operation mode
Disabled in Router mode; enabled in Bridge mode
IP pass-through (IPPT)
Enabled with the following address range:
192.168.5.20 to 192.168.5.99
DHCP server
Auto
DNS mode
Disabled.
If enabled, the default DMZ IP address is 192.168.5.4
DMZ
Mobile broadband and security
All bands
Network mode
Always except when roaming (The modem automatically attempts to connect
to the mobile broadband network when powered on, except when roaming.)
Auto Connect mode
Automatic (The modem connects automatically to the type of mobile broadband
network that is made available by your mobile broadband service provider.)
Network Selection mode
Auto (The modem uses the wireline broadband connection by default and fails
over to the mobile broadband connection if the wireline broadband connection
fails.)
Automatic failover mode
1430 (nonconfigurable)
MTU size
Disabled in Router mode; enabled in Bridge mode
IP pass-through (IPPT)
Enabled
NAT
Default Settings and Specifications
94
LTE Modem Model LB2120
