NETGEAR GS750E User Manual Download Page 69

Page: 69 / 76

View switch information or change the switch
device name

You can view the switch product name (model), serial number, MAC address, firmware
version, DHCP mode, and other network information.

You can also change the switch device name. This device name shows in, for example,
Windows Explorer and Bonjour.

To view information about the switch or change the switch device name:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Access the switch using a web
browser on page 7.

The login page displays.

4. Enter the switch password.

The default password is password. The password is case-sensitive.

To navigate to this page, select System > Management > Switch Information.

User Manual

Manage and Monitor the Switch

48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E

Summary of Contents for GS750E













































































Search results

Summary of Contents for GS750E

Reviews:

Related manuals for GS750E

Brands by name

Popular brands

NETGEAR GS750E, User Manual

Search results

Summary of Contents for GS750E

Reviews:

Related manuals for GS750E

Brands by name

Popular brands