You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
6. Launch a web browser.
7. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
8. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The Switch Information page displays.
9. Select
System > Maintenance > Firmware Upgrade
.
The Firmware Upgrade page displays.
10. Click the
Browse
button and locate and select the new firmware image file.
11. Click the
Apply
button.
Warning:
To avoid the risk of corrupting the firmware, do not interrupt the upgrade.
For example, do not turn off the switch or disconnect it.
When the upgrade is complete, your switch restarts. The upgrade process typically
takes about three minutes.
Reboot the Switch
You can reboot the switch remotely.
To reboot the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The Switch Information page displays.
User Manual
66
Manage and Monitor the Switch
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX
