You can select either the default VLAN ID (1) or a VLAN ID that you manually added
(see Create 802.1Q-Based VLANs in a Basic Configuration on page 33 or Create
802.1Q-Based VLANs in an Advanced Configuration on page 34).
7. In the
Class of Service
menu, select the class value for the voice VLAN.
You can select a value from 0 (the lowest priority) to 7 (the highest priority). The
default CoS value is 6.
8. Click the
Apply
button.
Your settings are saved.
Enable the Voice VLAN Mode for Ports
You can enable the voice VLAN mode for individual ports so that these ports become
members of the voice VLAN. By default, the voice VLAN mode is disabled for all ports.
To enable the voice VLAN mode for one or more ports:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The Switch Information page displays.
5. Select
VLAN > Voice VLAN > Port Settings
.
The OUI Port Settings page displays.
6. Select one or more ports.
7. In the
Voice VLAN Mode
menu, select
Enable
.
By default, the voice VLAN mode is disabled for all ports.
8. Click the
Apply
button.
Your settings are saved.
User Manual
39
Use VLANS for Traffic
Segmentation
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX
