8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Configure Switching
User Manual
222
The System Information page displays.
6.
Select
Switching
> Multicast > MLD Snooping > Multicast Router Configuration
.
7.
Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above the table heading:
•
1
(the unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
•
LAG
. Only LAGs are displayed.
•
All
. Both physical interfaces and LAGs are displayed.
8.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the port, or type
the port number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
9.
From the
Multicast Router
menu, select to enable or disable the multicast router for the
selected interfaces.
10.
Click the
Apply
button.
Your settings are saved.
Configure an MLD multicast router VLAN
To configure an MLD multicast router VLAN:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.