manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 180 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 180

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

180

The following table describes the nonconfigurable fields displayed on the page.

Table 33.  STP Configuration status

 

Field

Description

Global Settings

Configuration Digest Key

The identifier used to identify the configuration currently being used.

STP Status

Bridge Identifier

The bridge identifier for the CST. It is made up using the bridge priority and 
the base MAC address of the bridge.

Time Since Topology Change

The time in day-hour-minute-second format since the topology of the CST 
last changed.

Topology Change Count

The number of times that the topology changed for the CST.

Topology Change

The value of the topology change setting for the switch that indicates if a 
topology change is in progress on any port assigned to the CST. The option 
is True or False.

Designated Root

The bridge identifier of the root bridge. It consists of the bridge priority and 
the base MAC address of the bridge.

Root Path Cost

The path cost to the designated root for the CST.

Root Port

The port to access the designated root for the CST.

Max Age (secs)

The maximum age timer controls the maximum length of time in seconds 
that passes before a bridge port saves its configuration BPDU information.

Forward Delay (secs)

The derived value of the Root Port Bridge Forward Delay setting.

Hold Time (secs)

The minimum time in seconds between the transmission of configuration 
BPDUs.

CST Regional Root

The priority and base MAC address of the CST regional root.

CST Path Cost

The path cost to the CST tree regional root.

Configure the CST settings

You can configure a common spanning tree (CST) and internal spanning tree on the switch. 

To configure the CST settings:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments