manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 12 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 12

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Get Started 

User Manual

12

Note: 

In this manual, we refer to all switch models as 

the switch

. Unless 

noted otherwise, all information applies to all switch models. We refer 
to the local browser–based management interface as the local 
browser interface.

Note: 

For more information about the topics covered in this manual, visit the 

support website at 

netgear.com/support

.

Note: 

Firmware updates with new features and bug fixes are made available 

from time to time at 

netgear.com/support/download/

. Some 

products can regularly check the site and download new firmware, or 
you can check for and download new firmware manually. If the 
features or behavior of your product does not match what is described 
in this guide, you might need to update your firmware.

Available publications

The following guides are available at 

netgear.com/support/download/

:

•

Installation Guide

•

Hardware Installation Guide

For information about the NETGEAR Insight app and Insight Cloud portal, visit 

netgear.com/insight

 and 

netgear.com/support/product/Insight.aspx

. For knowledge base 

articles about NETGEAR Insight, visit 

netgear.com/support

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments