manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 116 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 116

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

116

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

System > LLDP > Advanced > LLDP-MED Port Settings

.

The LLDP-MED Port Settings page displays.

7. 

From the 

Port

 menu, select the port to configure.

8. 

Use the following menus to enable or disable the following LLDP-MED settings for the 
selected port:

•

LLDP-MED Status

. The administrative status of LLDP-MED on the interface. When 

LLDP-MED is enabled, the transmit and receive function of LLDP is effectively 
enabled on the interface.

•

Notification

. When Notification is enabled, the port sends a topology change 

notification if a device is connected or removed.

•

MED Capabilities

. When MED Capabilities is enabled, the port transmits the 

capabilities type length values (TLVs) in the LLDP PDU frames.

•

Network Policy.

 When Network Policy is enabled, the port transmits the network 

policy TLV in LLDP frames.

•

Extended MDI-PSE

. When Extended MDI-PSE is enabled, the port transmits the 

extended PSE TLV in LLDP frames.

9. 

Click the 

Apply

 button.

Your settings are saved.

View the local information advertised through LLDP

You can view the data that each port advertises through LLDP. 

To view the local LLDP information:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments