Configure System Information
91
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
View LLDP Neighbors Information
You can view the data that a specified interface received from other LLDP-enabled systems.
To view LLDP information received from a neighbor device:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
password
field.
The default password is
password
. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5.
Select
System > Advanced > LLDP > Neighbor Information
.
The Neighbor Information page displays.
If no information was received from a neighbor device, or if the link partner is not
LLDP-enabled, no information displays.
The following table describes the information that displays for all LLDP neighbors that
were discovered.
6.
To view additional information about the remote device, click the link in the MSAP Entry
column.
Field
Description
MSAP Entry
The Media Service Access Point (MSAP) entry number for the remote
device.
Local Port
The interface on the local system that received LLDP information from a
remote system.
Chassis ID Subtype
The type of data displayed in the Chassis ID field on the remote system.
Chassis ID
The remote 802 LAN device’s chassis.
Port ID Subtype
The type of data displayed in the remote system’s Port ID field.
Port ID
The physical address of the port on the remote system from which the data
was sent.
System Name
The system name associated with the remote device. If the field is blank, the
name might not be configured on the remote system.
