Configure System Information
42
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
Configure the Time Settings
The switch supports the Simple Network Time Protocol (SNTP). As its name suggests, it is a
less complicated version of Network Time Protocol, which is a system for synchronizing the
clocks of networked computer systems, primarily when data transfer is handled through the
Internet. You can also set the system time manually.
Configure the Time Setting Manually
You can view and adjust date and time settings.
To manually configure the time setting:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
password
field.
The default password is
password
. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5.
Select
System > Management > Time > Time Configuration
.
The Time Configuration page displays.
6.
Select the Clock Source
Local
radio button.
7.
In the
Date
field, specify the current date in months, days, and years (MM/DD/YYYY).
8.
In the
Time
field, specify the current time in hours, minutes, and seconds (HH:MM:SS).
Neighbor State
The state of the neighboring switch:
•
reachable (1)
. The neighbor is reachable from the switch.
•
stale (2)
. Information about the neighbor is scheduled for deletion.
•
delay (3)
. No information was received from the neighbor during
the delay period.
•
probe (4)
. The switch is attempting to probe the neighbor.
•
unknown (5)
. Unknown status.
Last Updated
The last time that the neighbor information was updated.
Table 9. IPv6 network interface neighbor table information (continued)
Field
Description
