NETGEAR DM111P - ADSL2+ Ethernet Modem, Reference Manual, Page: 34 / 50

DM111P ADSL2+ Ethernet Modem Reference Manual
3-6 Managing Your Modem
v1.0, August 2006
This screen shows the following parameters:
Table 3-1. Menu 3.2 - Modem Status Fields
Field Description
System Up Time The time that the modem has been connected to the Internet in the
format days:hours:minutes:seconds.
Account Name The Account Name assigned to the modem during setup.
Firmware Version Displays the modem firmware version. This value will change if you
upgrade your modem.
ADSL Port These parameters apply to the Internet (ADSL) port of the modem.
MAC Address Displays the Ethernet MAC address being used by the Internet (ADSL)
port of the modem.
IP Address Displays the IP address being used by the Internet (ADSL) port of the
modem. If no address is shown, the modem cannot connect to the
Internet.
Network Type The network type depends on your ISP.
IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (ADSL)
port of the modem.
Domain Name Server (DNS) Displays the DNS Server IP addresses being used by the modem. These
addresses are usually obtained dynamically from the ISP.
LAN Port These parameters apply to the Ethernet port of the modem.
MAC Address Displays the Ethernet MAC address being used by the Local (LAN) port
of the modem.
IP Address Displays the IP address being used by the Local (LAN) port of the
modem. The default is 192.168.0.1.
DHCP If OFF, the modem will not assign IP addresses to PCs on the LAN.
If ON, the modem will assign IP addresses to PCs on the LAN.
IP Subnet Mask Displays the IP Subnet Mask being used by the Local (LAN) port of the
modem. The default is 255.255.255.0.
Modem These parameters apply to the ADSL port of the modem.
Modem Status The connection status of the modem.
Downstream Speed The speed at which the modem is receiving data from the ADSL line.
Upstream Speed The speed at which the modem is transmitting data to the ADSL line.
VPI The Virtual Path Identifier setting.
VCI The Virtual Channel Identifier setting.