manualshive.com logo in svg

NETGEAR DGND3800B, User Manual, Page: 55 / 175

Share
Download
NETGEAR DGND3800B User Manual Download Page 55

Network Maintenance

55

 N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

Upgrade the Router Firmware

The modem router firmware (routing software) is stored in flash memory. By default, when 
you log in to your modem router, it checks the NETGEAR website for new firmware and alerts 
you if there is a newer version. 

WARNING!

When uploading firmware to the modem router, do not interrupt 
the web browser by closing the window, clicking a link, or loading 
a new page. If the browser is interrupted, it could corrupt the 
firmware.

Automatic Firmware Checking Off

You can turn the automatic firmware checking off and check for firmware updates manually if 
you prefer. See 

Manually Check for Firmware Upgrades 

on page

 

57. To turn off the automatic 

firmware check at login:

To turn off automatic firmware checking:

1. 

Select 

Maintenance > Router Upgrade

.

2. 

Clear the 

Check for Updated Firmware Upon Log-in

 check box at the bottom of this 

screen:

Summary of Contents for DGND3800B
















































































































































































Reviews:

No comments