manualshive.com logo in svg

NETGEAR DGND3800B, User Manual, Page: 132 / 175

Share
Download
NETGEAR DGND3800B User Manual Download Page 132

Virtual Private Networking

132

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B 

Select 

Advanced > VPN Policies

, and then click the 

Add Manual Policy

 radio button to 

display the VPN - Manual Policy screen:

The following table explains the fields in the VPN - Manual Policy screen.

Table 9.  VPN Manual Policy fields and settings 

 

Fields and Settings

Description

General
 
The modem router VPN 
tunnel network 
connection fields.

Policy Name

Enter a unique name to identify this policy. This name is not 
supplied to the remote VPN endpoint. It is used only to help you 
manage the policies.

Remote VPN 
Endpoint

• 

The remote VPN endpoint has to have this VPN’s gateway 

address entered as its remote VPN endpoint.

• 

If the remote endpoint has a dynamic IP address, select 

Dynamic IP Address

. No address data input is required. You 

can set up multiple remote dynamic IP policies, but only one 
such policy can be enabled at a time. Otherwise, select an 
option (

IP address

 or 

domain name

) and enter the address of 

the remote VPN endpoint to which you want to connect. 

Summary of Contents for DGND3800B
















































































































































































Reviews:

No comments