NETGEAR D6400 User Manual Download Page 13

Page: 13 / 292

Hardware Overview of the Modem Router

AC1600 WiFi VDSL/ADSL Modem Router Model D6400

Back Panel with Ports, Buttons, and Connector

Ethernet

Internet

Power

DC power

LAN ports

Reset
button

connector

On/Off button

DSL port

port

USB

2.0 port

The back panel of the modem router provides ports, buttons, and a DC power connector. The
following figure shows only part of the back panel.

Figure 3. Modem router back panel

Viewed from left to right, the back panel contains the following components:

•

USB port

. One USB 2.0 port. (Another USB 2.0 port is located on the right side panel.)

•

DSL port

. One RJ-11 asynchronous DSL port for connecting the modem router to an

ADSL or VDSL line. This port is colored gray.

•

Ethernet LAN ports

. Four Gigabit Ethernet RJ-45 LAN ports to connect the modem

router to LAN devices. These ports are colored yellow.

•

Internet port

. One Gigabit Ethernet RJ-45 port to connect the modem router to a fiber or

cable modem. This port is colored red.

Note:

You can use either the DSL port or the Internet port for WAN connectivity.
You cannot use both simultaneously.

•

Reset button

. For information about using the

Reset

button, see

Use the Reset Button

on page

227.

•

Power On/Off button

. Press the

Power On/Off

button to provide power to the modem

router or to turn it off.

•

DC power connector

. Connect the power adapter that came in the product package to

the DC power connector.

Summary of Contents for D6400





































































































































































































































































































Search results

Summary of Contents for D6400

Reviews:

NETGEAR D6400, User Manual, Page: 13 / 292

Search results

Summary of Contents for D6400

Reviews: