NETGEAR D2200D-1FRNAS User Manual Download Page 8

Page: 8 / 84

Hardware Setup

ADSL2+ Gateway

You can use the LEDs to verify status and connections. The following table lists and
describes each LED and button on the front panel of the gateway.

LED

Description

POWER

•

Green

. Power is supplied to the gateway.

•

Off

. No power is supplied to the gateway.

E1, E2, E3, E4

•

Green

. A powered-on device is connected to this Ethernet port.

•

Off

. No device is connected to this Ethernet port.

WIRELESS

•

Green

. The wireless radio is on.

•

Off

. The wireless radio is off.

DSL

•

Green

. The gateway has a DSL connection.

•

Slow blinking green

. The gateway is looking for a signal.

•

Fast blinking green

. The gateway found the signal and is performing negotiation and

handshaking.

•

Off

. The gateway does not have a DSL connection.

INTERNET

•

Solid blue

. The gateway is online.

•

Blinking blue

. The gateway is sending or receiving Internet traffic.

•

Off

. The gateway is offline.

Rear Panel

The rear panel has the connections and button shown the following figure.

Power

Ethernet LAN ports

Power

Reset

DSL port

adapter
input

On/Off
button

button

Figure 3. Gateway rear panel

DRAFT

Summary of Contents for D2200D-1FRNAS





















































































Search results

Summary of Contents for D2200D-1FRNAS

Reviews:

Related manuals for D2200D-1FRNAS

Brands by name

Popular brands

NETGEAR D2200D-1FRNAS, User Manual

Search results

Summary of Contents for D2200D-1FRNAS

Reviews:

Related manuals for D2200D-1FRNAS

Brands by name

Popular brands