manualshive.com logo in svg

NETGEAR CM1100, User Manual, Page: 27 / 28

Share
Download
NETGEAR CM1100 User Manual Download Page 27

Factory Settings

The following table shows the factory default settings for the cable modem.

Table 4. Factory default settings

Default Setting

Feature

http://192.168.100.1

User login URL

Cable modem login

admin

User name (case-sensitive)

password

Login password (case-sensitive)

Use default hardware address

WAN MAC address

Internet connection

1500

WAN MTU size

AutoSensing

Port speed

Disabled by default

Ethernet port aggregation

Technical Specifications

The following table lists the technical specifications for the cable modem.

Table 5. Technical specifications

Specification

Feature

•

Input: 110–120V, 47–60 Hz

•

Output: 12 VDC, 2.5 A

Power adapter

•

Dimensions: 8.8 x 3.4 x 5.9 in. (224 x 86 x 150 mm)

•

Weight: 1.00 lb (460 g)

Physical specifications

•

Operating temperature: 32° to 104°F (0° to 40°C)

•

Operating humidity: 90% maximum relative humidity, noncondensing

Environmental

•

Local: Two 10/100/1000 RJ-45 Gigabit Ethernet ports

•

Internet: Coaxial cable connector DOCSIS 3.1; backward-compatible
with DOCSIS 3.0

Interface

Supplemental Information

27

Nighthawk Multi-Gig Speed Cable Modem

Summary of Contents for CM1100





























Reviews:

No comments