manualshive.com logo in svg

NETGEAR CM1000v2, User Manual, Page: 7 / 28

Share
Download
NETGEAR CM1000v2 User Manual Download Page 7

Table 1. LED descriptions

Description

Icon

LED

• Solid green. Power is supplied to the cable modem.

• Off. No power is supplied to the cable modem.

• Solid red. The cable modem is too warm and might overheat. For

more information about this condition, see Use LEDs to troubleshoot
on page 23.

Power

• Solid amber. One downstream channel is locked.

• Solid green. Two or more downstream channels are locked.

• Blinking green. The cable modem is scanning for a downstream

channel.

• Off. No downstream channel is locked.

Downstream

• Solid amber. One upstream channel is locked.

• Solid green. Two or more upstream channels are locked.

• Blinking green. The cable modem is scanning for an upstream

channel.

• Off. No upstream channel is locked.

Upstream

• Solid green. The cable modem is online.

• Blinking green. The cable modem is synchronizing with the cable

provider’s cable modem termination system (CMTS).

• Off. The cable modem is offline.

Online

• Solid green. A powered-on device is connected to the LAN port at

1000 Mbps.

• Solid amber. A powered-on device is connected to the LAN port at

10 Mbps or 100 Mbps.

• Off. No device is connected to the LAN port.

• Blinking green or amber. The LAN port is processing traffic.

Ethernet

Rear panel

The connections and button on the rear panel are shown in the following figure.

User Manual

7

Hardware Setup

High Speed Cable Modem

Summary of Contents for CM1000v2





























Reviews:

No comments