NETGEAR C6250 User Manual Download Page 170

Page: 170 / 198

Manage Port Forwarding and Port Triggering

170

AC1600 WiFi Cable Modem Router

Make sure that the

Port Forwarding

radio button is selected.

In the table, select the radio button next to the service or application name.

Click the

Edit Service

button.

The Ports - Custom Services page displays.

Change the settings.

For more information about the settings, see

Add a Port Forwarding Rule with a Custom

Service or Application

on page

167.

10.

Click the

Apply

button.

Your settings are saved. The changed rule displays in the table on the Port Forwarding /
Port Triggering page.

Remove a Port Forwarding Rule

You can remove a port forwarding rule that you no longer need.



To remove a port forwarding rule:

Launch an Internet browser from a computer or WiFi device that is connected to the

network.

Type

http://www.routerlogin.net

A login window opens.

Type

admin

for the user name and type your password.

If you did not yet personalize your password, type

password

for the password.

Summary of Contents for C6250







































































































































































































Search results

Summary of Contents for C6250

Reviews:

Brands by name

Popular brands

NETGEAR C6250, User Manual

Search results

Summary of Contents for C6250

Reviews:

Brands by name

Popular brands