manualshive.com logo in svg

NETGEAR C6250, User Manual

Share
Download
NETGEAR C6250 User Manual Download Page 159

Manage the Advanced WiFi Network Settings 

159

 AC1600 WiFi Cable Modem Router

6. 

Select or clear the 

Enable Beamforming Transmission (BFR)

 check box.

Selecting the check box enables BFR and clearing the check box disables BFR.

7. 

Select or clear the 

Enable Beamforming Reception (BFE)

 check box.

Selecting the check box enables BFE and clearing the check box disables BFE.

8. 

Click the 

Apply

 button.

Your settings are saved.

Manage the Advanced WiFi Settings

The modem router is already configured with the optimum settings. Do not change the 
advanced WiFi settings (fragmentation length and CTS/RTS threshold) unless directed by 
technical support. Incorrect settings might disable the WiFi radios.

To change the advanced WiFi settings:

1. 

Launch an Internet browser from a computer or WiFi device that is connected to the 

network. 

2. 

Type 

http://www.routerlogin.net

.

A login window opens.

3. 

Type 

admin

 for the user name and type your password.

If you did not yet personalize your password, type 

password 

for the password.

Summary of Contents for C6250







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands