Specify Internet Port Settings
92
WiFi Cable Modem Router Model C3000v2 and C3700v2
9.
In the
Service Type
menu, select the protocol.
If you are unsure, select
TCP/UDP
.
10.
In the
External Starting Port
field, enter the beginning port number.
If the application uses a single port, enter the same port number in the
Ending Port
field.
If the application uses a range of ports, enter the ending port number of the range in the
External Ending Port
field.
11.
To specify the internal starting and ending ports, do one of the following:
•
Type the port numbers in the
Internal Starting Port
and
Internal Ending Port
fields.
•
Select the
Use the same port range for Internal ports
check box.
12.
Type the IP address in the
Internal IP address
field or select the radio button for an
attached device listed in the table.
13.
Click the
Apply
button.
The service is now in the list on the Port Forwarding/Port Triggering page.
Edit a Port Forwarding Service
To edit a port forwarding entry:
1.
Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2.
Type
http://routerlogin.net
or
http://192.168.0.1
.
A login window opens.
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > Port Forwarding/Port Triggering
.
The Port Forwarding/Port Triggering page displays.
5.
Leave the
Port Forwarding
radio button selected as the service type.
6.
In the table, select the radio button next to the service name.
7.
Click the
Edit Service
button.
The Ports - Custom Services page displays.
8.
Specify changes to the settings.
9.
Click the
Apply
button.
Your settings are saved.
