NETGEAR C3700v2 User Manual Download

Page: 79 / 107

Manage Your Network

WiFi Cable Modem Router Model C3000v2 and C3700v2

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Administration >

Backup Settings

The Backup Settings page displays.

Click the

Browse

button to find and select the

.cfg

file.

Click the

Restore

button.

The file is uploaded to the modem router and the modem router reboots.

WARNING:

Do not interrupt the reboot process.

Erase the Current Configuration Settings

You can erase the current configuration and restore the factory default settings. You might
want to do this if you move the modem router to a different network. (For more information,
see

Factory Default Settings

on page

105.)



To erase the configuration settings:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Administration >

Backup Settings

The Backup Settings page displays.

Click the

Erase

button.

The factory default settings are restored. The user name is admin, the password is password,
and the LAN IP address is 192.168.0.1. DHCP is enabled.

Summary of Contents for C3700v2












































































































Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands

NETGEAR C3700v2, User Manual

Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands