NETGEAR C3700v2 User Manual Download

Page: 58 / 107

Specify Network Settings

WiFi Cable Modem Router Model C3000v2 and C3700v2

The reserved address is not assigned until the next time the computer contacts the modem
router’s DHCP server. Reboot the computer, or access its IP configuration and force a DHCP
release and renew.

Edit a Reserved Address Entry



To edit a reserved address entry:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Setup > LAN Setup

The LAN Setup page displays.

Select the radio button next to the reserved address.

Click the

Edit

button.

Change the settings.

Click the

Apply

button.

Your settings are saved.

Delete a Reserved Address Entry



To delete a reserved address entry:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Setup > LAN Setup

The LAN Setup page displays.

Summary of Contents for C3700v2












































































































Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands

NETGEAR C3700v2, User Manual

Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands