NETGEAR C3700v2 User Manual Download

Page: 50 / 107

Specify Network Settings

WiFi Cable Modem Router Model C3000v2 and C3700v2

View or Change the WAN Settings

You can view the wide area network (WAN) settings for the Internet port. You can set up a
DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable
the modem router to respond to a ping to its WAN (Internet) port.



To view or change the WAN settings:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Setup > WAN Setup

View or change the following settings:

•

Disable IPv4 Firewall Protection

. The firewall protects your network. Firewall

protection is particularly important if you use port forwarding or if you use a DMZ
server.

•

Disable Port Scan and DoS Protection

. DoS protection protects your LAN against

denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, and many
others. Select this check box only in special circumstances.

•

Default DMZ Server

. This feature is sometimes helpful when you are playing online

games or videoconferencing, but it makes the firewall security less effective. See

Set

Up a Default DMZ Server

on page

53.

•

Respond to Ping on Internet Port

. This feature allows your modem router to be

discovered. Use this feature only as a diagnostic tool or if there is a specific reason.

Summary of Contents for C3700v2












































































































Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands

NETGEAR C3700v2, User Manual

Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands